Our Equipment is up to date with new advanced technology

Computer Network

• All computers are networked to a central file server via a Microsoft network. This enables us to utilize central database systems encompassing sales, finance, quality, engineering and production. Engineering software is also utilized to support the traveler system and controlled impedance parameters.

CAM Department

• 2 Intel Pentium CAM workstations with CAM 350 Editing Software.
• 1 Intel 486 support PC with 28.8 V.34 modem connection.
• All PC's are networked and link directly into the Excellon Data Workshop.
• 2 Nuarc inspection tables.

Engineering/Planning Department

• 1 Bruning 9036 print copier.
• 2 Nuarc inspection tables.

Material Prep Department

• 1 Roper Whitney H352 hydraulic shear system.
• 1 Blue M Model OV588 bake/cure oven.
• 1 Mitsubishi fork lift FGC15.

Drill Department

• Pluritec Multistation drill with 2 fully automated drilling cells with automatic load, automatic tool change, laser drill bit measurement verification and dynamic run-out check. Depth control linear scales. .004" drilled hole capability. Controlled by a Sieb & Meyer CNC 44 data communication and information management system.
• Pluritec Inspecta X-Ray/Drilling System. Inspecta X-Ray/Drilling module performs reference detection and measurement of the drill coordinates. Calculates the optimized drill location and determines compensation factors.
• 1 Excellon Data Workshop with DNC-3 communication system.
• 1 Excellon Opic III program system.
• 1 Excellon XL-5 driller with CNC-5 controller system.
• 1 Excellon EX200 driller with CNC-6 controller system.
• 1 Hewlett-Packard model 43805N X-Ray/Faxitron System.
• 1 Glenbrook Technologies model 9008 x-ray Film processor
• 1 Nuarc light table.
• 1 Twistair TA-030BA1121th air compressor system.

Artwork Imaging Department

• 3 Nuarc inspection stations w/Olympus SZ30 microscopes.
• 1 Nuarc FT40APNS Ultra-Plus fliptop exposure system.

Resist Imaging & Dry Film Department

• 1 Imagemaster 5000 5KW double drawer exposure unit.
• 2 Colight 1230 5KW double drawer exposure units.
• 1 Technilith model 6000 dry developer.
• 1 Dynachem CSL 1500B cut sheet laminator system.
• 1 Dynachem model 308 resist laminator.
• 1 Dynachem model 72Y soldermask vacuum laminator.
• 1 Kahn model M film area reader.
• 3 Nuarc inspection tables.

Lamination Department

• 1 Multiline post-etch punch tooling system.
• 1 Multiline de-pinner system.
• 1 TMP 25 x 25, four opening hydraulic vacuum assist press with four opening cool down press.
• 1 Wabash 24 x 24, two opening hydraulic press w/vacuum frame assist.
• 1 Given PHI 18 x 18, two opening hydraulic press.
• 1 Tetrahedron 14 x 14, one opening scale flow press.
• 1 Traulsen prepreg controlled environment storage system.
• 1 Blue M model D2972-2 bake/cure oven.
• 1 Grieve model AA-500 bake/cure oven.
• 1 Grieve model 333 bake/cure oven.
• 1 Delta drill.

Plasma

• 1 Advanced Plasma APS 2400 etchback & desmear system.

Plating Department

• 1 Avalon Avtec 2000 vertical hot air level system (HASL).
• 1 Chemcut CS-2000 aqueous developer system.
• 1 Atotech 547XL etcher system.
• 1 IS pumiflex layer clean line.
• 1 Dynachem laminar developer.
• 1 ASI resist stripper system.
• 1 Chemcut 604 mechanical finisher.
• 1 Shipley electroless copper plating line.
• 2 525 gallon enthone 245A electroplating copper tanks.
• 1 575 gallon electroplating tin/lead tank.
• 1 Lectronic pyro bond or nickel/gold tab line.
• 1 Autronic C-DT nickel/gold deep well tank.
• 1 Microetch line.
• 1 Shipley black oxide line.
• 1 Hot oil Reflow station.
• 1 Grieve model AA500 oven.
• 1 Blue M modelFC792 oven.
• 1 Gardner-Denver air compressor system.
• 1 Waste water treatment system.
• 1 Copper line.
• 1 Tin/Lead line.

Laboratory

• 1 PC-Chemical analysis/Truchem computer system.
• 1 Unitron Unimet 8436 microscope system with Hitachi monitor.
• 1 Struer's automatic microsection grinder/polisher system.
• 1 Seiko XRF coating thickness gauge model SFT7353 system.
• 1 Omega meter ionic contamination test system model 600.
• 1 Sequoia-Turner spectraphotometer model 340 with Far-UV source.
• 1 ECI Qualiderm D2000 microcomputer for plating bath analysis.
• 1 Grieve model LR-271C laboratory oven.
• 1 Solder pot test lab system.

Routing Department

• 1 Excellon EX200 router with CNC-6 controller.
• 1 Bevelmaster bevel system.

Screening Department 1 Argon UV Fast Curing System. 1 Circuit Chemistry LPI/Dry Film Vertical Soldermask Developer. 1 Grieve CAH bake oven. 1 Grieve 333 bake oven. 1 Despatch bake oven. 2 Micrajust model 2000UA screening table. 25 Barnaby model 404 screening frames

Electrical Test Department

• 1 Trace Instruments 948 100V electrical tester
• 1 Semtronics Static Charge Neutralizer
• 1 Tektronix TDR tester

Quality Control Department

• 1 Gerber Accumatch Automated Optical Inspection System.
• 1 Olympus SZ20W & Highlight 2000 microscope system.
• 1 Metronics QuadraChek II EPOD w/Hitachi HV-62U camera.
• 1 Metroplate 4191 Graphite measuring system.
• 4 Nuarc inspection stations
• Various calipers, micrometers, pin gauges, etc.

Back to main page